Product

Fully Automatic Oral Liquid/Syrup Filling Production Line

A combination of ultrasonic cleaning and washing, high temperature water sterilizing, infrared drying, multi-head filling and sealing technology. The whole line linked is controlled with automation. Simple to operate with advanced technology utilizing mechanical and electrical integration.

Fully Automatic Oral Liquid/Syrup Filling Production Line

Introduction of Oral Liquid Filling Production Line

This filling production line is made up of ultrasonic washing machine, infrared drying and sterilizing machine, and a filling and capping machine, which is divided into the washing area, drying and sterilizing area, and filling and sealing area. The complete line can manufacture soundly and combine with other machines and complete the following procedures: watering, ultrasonic washing, bottle clamping with manipulators, turning, water flushing, air charging, preheated drying and sterilizing, cooling, filling, cap arranging, cap-feeding, and capping/sealing.

The linear type washing machine is used to clean inside and outside of vials and glass bottles. It has the following characteristics: 

  • Bottles are fed continuously by mesh belt into the machine. 

  • Vials are cleaned by spray water with different working media.

  • Tunnel is operated in intermittent movement.

  • Bottle pocket is used to hold the bottle for cleaning the transportation.

Applications of Oral Liquid Filling Production Line

Pharmaceutical: Oral liquid, syrup, etc

Food: Oral water, energy drink, etc.


Applications of Oral Liquid Filling Production Line

Features of Oral Liquid Filling Production Line

  • The frame is made of stainless steel, with a polished surface. In the machine, key components include the main driving mechanism and working media piping/control system and others

  • The operating area and the side protective board are made of AISI304 stainless steel. The surface of the device is covered with brushed stainless steel

  • The washer is equipped with a tank to save circulating water and includes a heating tube and temperature sensor inside. It can control the circulating water temperature to above 65℃

  • Control Cabinet connects with main machine and is made of 304 stainless steel

  • The machine can be drained completely

  • The orbital welding is used for SS pipes conforming to the EU standard

  • 20% of welding is checked with Borescopes

  • Automatic water drainage after production


vial washing sterilizing filling capping line.jpg

 Linear Bottle Washing Machine

Name

Consumption

Pressure

Circulating Water


0.3~0.35MPa (with pressure indication)

WFI

1200 L / h

0.3~0.35 MPa (with pressure indication  Protection)

Compressed Air

50 m3/h

0.35 MPa (with pressure indication protection)

Sterilization and Depyrogenation Tunnel

Dimension

Data

Unit

Length

3700

mm

Width

1750

mm

Height

1850

mm

Total Power

12

kW

Weight

1800

kg

Throughput
( vials:50ml)

100

Vials/min

Breakage Ratio

≤1‰


Aseptic Liquid Filling Machine

Dimension

Data

Unit

Length
6200 mm

Width

2500

mm

Height

2520

mm

Total Power

96

kW

Weight

Output  
( vials:50ml)

5600

100

kg

vials/min

Max. temperature

320

Outfeed Temperature

(by heat exchanger)

≤ambient  

temperature+5

Noise

≤75

dB(A)

Capping Machine

Dimension

Data

Unit

Length

3240

mm

Width

1760

mm

Height

1680

mm

Total Power

4.5

kW

Weight

1400

kg

Throughput (vials:50ml)

100

vials/min

Filling Precision

≤±0.5

%

Add Stopper Accuracy

≥99.9

%

Disrepair Rate

≤1

Noise

≤75

dB(A)







Last product:Automatic Oral Liquid Glass Bottle Capping Machine

Next product:Automatic Oral Liquid Plastic Ampoule Filling and Sealing Machine